Other soldering materials

Produtrónica supplies a wide variety of products all of which are used on a daily basis in electronics industry.

 

Desoldering braid
Desoldering braid

Desoldering braid (wick) is pre-fluxed copper braid that is used to remove solder, which allows components to be replaced and excess solder to be removed.
Desoldering braid is available in static dissipative bobbins (except where indicated) for static sensitive environments.
Produced in USA.

Kapton tape
Kapton tape

Kapton Tape is a polyimide high temperature masking tape capable of withstanding temperatures up to 260°C or 300ºC.
The Tape is suitable for masking during a range of soldering processes.

PCB solder pallets
PCB solder pallets

PCB solder pallets are used to fix electronic components on printed circuit boards using the wave soldering process.
The design of the solder pallets is exactly adjusted to the design of the printed circuit board.
Produced in France.

pH paper
pH paper

Rapid determination of pH value in industrial applications.
In electronics, pH paper is used to see if the flux deposit is homogeneous.
Produced in France

Shear cutters
Shear cutters

Shears have a thin profile designed for those hard-to-reach areas in electronic assembly.
Assemblers love the effortless shearing action, comfort, light weight, and safety for electronics lead and wire cutting. Our shears use the shear cutting method, which requires 50% less operator effort and extends cutting life because they shear rather than pinch.
Handles are cushioned for day long comfort, and automatically spring back to their original position after each use.
Produced in USA and Germany.

Solder mask
Solder mask

Prevent soldering protected areas in a wave soldering process by applying temporary solder mask.
Designed to apply smoothly, dry quickly, withstand high lead­free process temperatures, and then be removed easily. Also used for masking conformal coating.
Made in USA.

Solder paint
Solder paint

Solder Paint is a homogenous combination of fine powdered solder alloys available in both leaded or unleaded alloys suspended in a highly active zinc chloride based flux.
Solder Paint is ideally suited to tinning and sweating of many materials. The paint should be applied by brush or spray to clean dry surfaces which are in a cold state. Degreasing is not necessary. As with many industrial tinning fluxes containing Zinc Chloride the residues are corrosive and should be washed off the tinned areas after soldering with warm soapy water applied with a wet cloth or brush.
Produced in United Kigdom

Solder pots
Solder pots

Solder pots are ideal for tinning lead wires, pre-tinning small electrical parts, or dip soldering small assemblies and circuit devices.
The porcelain coated crucible is easy to clean and offers a long service life. Solder will not adhere to the porcelainized surface, allowing for easy maintenance. The coating also resists the corrosion common with activated fluxes and high tin content solders.
Produced in USA.

Soldering tips
Soldering tips

Our tips fit all of the most popular soldering stations.
The long life and fast heat recovery of soldering/desoldering tips increases user effectiveness and decreases production times.
Produced in Cost Rica

Sponges
Sponges

Our sponges are manufactured with pure cellulose (a wood derivative) which has the ability to absorb many times its weight in water. Also resistant to abrasion and tearing forces that occur during the tip wiping process.
Cellular structure is designed to expand when wet, and retain water for long periods of time. Meets ANSI (J-STD-001B) for low sulfur content and fine porosity.
Made in USA.

Squeegees
Squeegees

Permalex™ Edge Metal Squeegees are a premium brand of metal squeegees used for SMT and Microelectronics printing applications. This leading product incorporates many customer needs such as long service life, improved printing quality, ease of use and ease of ordering.
Permalex Edge Squeegees directly support your lead-free process by assuring maximum print quality despite the reduced wetting and joining performance of lead-free materials. Furthermore, the long life of Permalex blades reduces wasteful material maintenance and down-time cycles.
Produced in USA.

Stencils
Stencils

Solder paste stencils fulfill today’s challenging printing requirements with fast response, high accuracy, excellent printing performance and worldwide availability.
Stencil Technology offers the SMT engineer significant flexibility in achieving the right solder paste volume deposit for devices with markedly diverse paste requirement. They can provide additional paste height in selected areas of the PCB (step-up stencils) or reduced height deposits in other areas (step down stencils).
Produced in France.

Tweezers
Tweezers

Stainless steel precision tweezers for safe handling of SMD components.
Produced in Switzerland